PRODUCTS / 03
Solar Inverters
Off-grid, hybrid, on-grid and micro inverters, selected so the DC side and the battery speak the same protocol out of the box.
Rated output
1 – 350 kW
Efficiency
up to 99%
MPPT
1 – 12 trackers
Protection
IP65 / IP66
SPECIFICATIONS
Rated output
1 – 350 kW
Topology
Off-grid · hybrid · on-grid tie · micro · pure sine wave
MPPT trackers
1 – 12, 150 – 1000 V DC window
Peak efficiency
up to 99.0%, EU weighted 97.5%
Battery interface
48 V DC or high voltage, CAN / RS485
Protection
IP65 / IP66, C5-M enclosure, integrated SPD
Communication
WiFi / RS485 / CAN, app and portal
Warranty
5 – 10 years
In the range
Every model is pre-set to common battery protocols before it leaves the hub.
Off-Grid Inverters
Battery-first inverter with built-in charger.
Hybrid Inverters
Solar, grid and battery managed in one box.
On-Grid Tie Inverters
String inverters for grid-export systems.
Micro Inverters
One per panel, no single point of failure.
Pure Sine Wave Inverters
Clean AC for sensitive electronics.
INSTALLATION
Commissioning in four steps
01
Mount vertically with 300 mm clearance; check string polarity first.
02
Set the grid code and export limit for the destination country.
03
Bind the battery BMS to the inverter and confirm SOC reporting.
04
Run a full-load test and export the commissioning report.
Grid-code files, commissioning sheets and firmware notes are included with each unit.
Matching an inverter to a battery?
Send the array size, battery voltage and destination grid code — we name the exact model and the lead time.