PRODUCTS / 04
Batteries & Energy Storage
LiFePO4 storage in wall-mount, rack-mount and portable formats, with integrated BMS and CAN/RS485 communication to the inverter.
Chemistry
LiFePO4
Module
2.4 – 5.0 kWh
Cycles
6,000 @ 90% DoD
Warranty
10 years
SPECIFICATIONS
Chemistry
LiFePO4 (LFP), grade-A prismatic cells
Capacity
2.4 – 5.0 kWh per module, up to 15 modules in parallel
Voltage
48 V low voltage / 100 – 800 V high voltage
Cycle life
6,000 cycles at 90% DoD, 80% capacity retained
Round-trip efficiency
≥ 90%
BMS
Integrated, CAN / RS485, cell balancing
Operating range
-10 °C to 55 °C, IP65 (wall mount)
Warranty
10 years
In the range
Modules are stackable — start with one and parallel up as the load grows.
LiFePO4 Wall Mount Battery
Slim 48 V home battery, 6,000 cycles.
Rack Mount LiFePO4 Batteries
19-inch modules for cabinets and C&I rooms.
Portable Power Station
Carry-on power with AC outlets and a display.
Lead Acid Batteries
Entry-level AGM blocks for small off-grid loads.
INSTALLATION
From unboxing to first charge
01
Fix the wall bracket to a structural surface at 300 mm floor clearance.
02
Land DC cables with the supplied torque wrench and fit the terminal covers.
03
Set the DIP address before powering multiple modules in parallel.
04
Charge to 100% once and record the first capacity test.
Capacity test templates, BMS protocol lists and the UN38.3 pack ship with every order.
Sizing a bank?
Tell us the daily kWh to store and the inverter you run — we return the module count, the wiring plan and a price.